From general industrial weighing applications such as shipping and receiving, bulk loading, and counting, to abusive operations such as shock-end or corner-loading, Applied Scales has a complete line of floor scales delivers durability and accuracy.

DIGI® Summit 3000 Floor Scale

• Four NTEP-certified alloy steel shear beam load cells
  
• Top access j-box
  
• Rugged diamond safety treadplate steel deck
  
• Four adjustable rigid polyurethane rubber feet, 3" (76.2 mm) diameter
  
• Signal trim summing board housed in ABS enclosure
  
• Threaded eyebolt hole (1/2–13NC) located in the center of the deck for
  easy lifting
  
• 20 ft of EL147 load cell cable with quick disconnect120 Digital Weight Indicator
  
• Large .8" (20.3 mm) Light Emitting Diode (LED) display
  
• 5-button operation
  
• Full front-panel digital calibration and configuration
  
• 120 wall mount bracket included

Gator Deck

• NEMA 6P Load Cells and NEMA 4X Junction Box
  
• TLO Design Increases Accuracy
  
• Top Access To Junction Box
  
• Formed Steel Channels Increase Structural Integrity
  
• Heavy Duty 1/4" Diamond Tread Deck Plate
  
• Heavy Duty 5/8" Load Cell Plates Assure Direct Force Transfer

Electrical  
  Output (Nominal) 1.20 - 2.00 mV/V
  Bridge Resistance 350 ohms
  Rated Excitation 10 VDC (15 VDC max.)
Enclosures  
  Material A36 Carbon Steel
Performance  
  Overload Capacity 200 % overload, 100 % endloading
  Operating Temperature -10 to +40 C (14 to 104 F)
  Warranty-2 Year Limited
  Design Accuracy 1:5000d
  Approvals NTEP COC# 01-097

XFS50S-XIF - XFS50S - XIF 5000LB 4X4
The Xpress Standard Floor Scale is a fully electronic, portable low profile floorscale / indicator package, ideal for freight consolidators, forwarders, small processing plants, resellers, shipping and receiving departments as well as startup businesses. Quick connects and factory calibration allows the package to operate out-of-the-box, immediately with minimal setup. This timesaving solution combines a 5000d NTEP approved floor scale containing four analog sealed load cells as well as a stainless steel IP 65 rated indicator featuring an RS-232 interface, an easy readable 6 digit LCD display and four color coded tactile-feel keys.

Standard Features

• Stainless steel IP65 rated indicator
  
• ZERO, TARE, FUNCTION, and PRINT tactile-feel keys
  
• RS-232 standard interface
  
• Units lb, kg, g
  
• 5000d Class III load cells
  
• Factory precalibrated system, out-of-the-box functionality