Paramounts® EP and HS Medium-Capacity Weigh Modules
Designed with a blind load hole, the Paramounts EP and HS low-profile mounts isolate the load cell from unwanted side and eccentric loads, providing superior accuracy in applications with extreme expansion, contraction and vibration. Integral jacking/shipping bolts allow quick field removal of load cells, and eliminate load cell damage during transport.
* EP modules provide environmentally protected load cells
* HS modules provide hermetically-sealed load cells for use in washdown and corrosive environments

Paramounts® HS
(Hermetically-sealed Load Cells)
Mild Steel, Light-to-Medium Capacity Tank Weighing Systems
The Paramounts tank wieghing system consists of one fixed-pin mount which allows only the top plate to rotate, one side-stop mount which allows the top plate to slide along the cell only, and one or more free-sliding mount(s) which allow the top plate to slide freely in all directions. This system provides self checking in applications of extreme temperature fluctuations and vibration while maintaining unparalleled system accuracy.

220 Universal Mount
(Hermetically-sealed Load Cells)
The 200 Universal Mount is designed to be used with the Model 220 load cell. The mount incorporates built-in jacking bolts to prevent damage to the load cell during installation Its stainless steel construction is designed to be used in the harshest of environments.

ITA (Integrated Tank Assembly)

Electrical  
  Rated Excitation 10 - 15 VAC/VDC
  Excitation + Green
  Excitation (-) Black
  Signal + White
  Signal (-) Red
  Cable Length 25 feet, 4-Cond. Shielded
Performance  
  Full Scale 3 mV/V nominal
  Linearity +/- 0.01 %
  Repeatability +/- 0.05 % of Full Scale
  Bridge Resistance 350 ohm nominal
  Operating Temperature 10 to 110 F (-12 to 43 C)
  Safe Overload 150 %
  Seal Type Hermetic, IP66/IP68
  Calibration Software using Actual mV/V or Calibration Weight
  Construction All Stainless Steel (cap. 150-450K alloy base plate)
  Capacities 1K - 450K lb.

LeverMount® Tank Assembly

Electrical  
  Rated Excitation 10 - 15 VAC/VDC
  Excitation + Green
  Excitation (-) Black
  Signal + White
  Signal (-) Red
  Cable Length 25 feet, 4-Cond. Shielded
Performance  
  Full Scale 3 mV/V nominal
  Linearity +/- 0.01 %
  Repeatability +/- 0.05 % of Full Scale
  Bridge Resistance 350 ohm nominal
  Operating Temperature 10 to 110 F (-12 to 43 C)
  Safe Overload 150 %
  Seal Type Hermetic, IP66/IP68
  Calibration Software using Actual mV/V or Calibration Weight
  Construction All Stainless Steel (cap. 150-450K alloy base plate)
  Capacities 1K - 450K lb.